Millipore Milli-Q Plus Manuel d'utilisateur télécharger pdf (Page 23)

PRE INSTALLATION

Milli-Q Academic / Academic A10 15

3-2 PRE INSTALLATION CHECKLIST – «ARMLESS» MILLI-Q

Milli-Q Systems can be ordered from Millipore without the Front Arm and without the Front Point Of Use Dispenser.

These are called «Production» or «Armless» Milli-Q Systems. These Milli-Q Systems always begin with ZMQP

instead of ZMQS.

When a «Production» Milli-Q is ordered (you ordered Millipore Catalogue Number ZMQP ... for example), the

Milli-Q arrives in a box without a Front Arm and without a Front Point Of Use Dispenser.

It is necessary to have a Remote Point Of Use Dispenser with these types of Milli-Qs. Section 3-3 of this manual

has more information regarding the Remote Point Of Use Dispenser.

It may be desired to have Remote Display with the «Production» Milli-Q System. An example of when this would be

needed is when the Milli-Q System is being mounted underneath a Lab Bench. In this instance, the Remote Display

(and Remote Point Of Use Dispenser) could be mounted on top of the Lab Bench.

When you have a «Production» type of Milli-Q System, use the same Pre Installation Checklist on the

previous page. Additionally, you should review the items below also.

 Do you have a Remote Point Of Use Dispenser (this item is not part of a ZMQP Millipore Catalogue Number)?

 Do you have a Remote Display? (This item is not part of a ZMQP Millipore Catalogue Number)?

 Will the Milli-Q System Cabinet and the Remote POU Dispenser be located within 2.5 meters of each other?

 Will the Milli-Q System Cabinet and the Remote Display be located within 2.4 meters of each other?

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 92 93

Pas de commentaire

Millipore Milli-Q Plus Manuel d'utilisateur Page 23